As popular as what the 357 Maximum is, I have decided to make it the MONTHLY SPECIAL for both November and December...

I will be offering the following work - built around your H&R or N.E.F. break open single shot rifle:

1) Your supplied barrel will be stubbed with a match grade stainless steel barrel, chambered in 357 Maximum. The barrel will be 1.062" in diameter and any length you request from 16 1/4" to 24" with a 1-18" twist rate...

2) Your supplied forend (wood or laminate) will be pillar/glass bedded...

3) Scope base and barrel will be modified to the larger and longer 8-40 screws and the base will be bedded to the barrel...

4) The trigger will be adjusted to a crisp pull weight of 2 1/2 to 3 lbs...

5) A set of Burris Signature ZEE rings with additional off-set inserts will be provided with each rifle...

Here are a couple of pictures of what these rifles will look like, with a couple of targets showing what these guns are capable of -






Bullets used were Sierra's 158 gr. JHP, fired at a very modest muzzle velocity of 2,400 fps...









With your provided rifle, I will build you a 357 Maximum like the one pictured above - (minus scope) for a total cost of $550 plus return shipping/insurance...

Any questions, just ask!

DAVID